Plastic pellets

X-Pro® PP 4212

Polypropylene Copolymer, recycled, medium flow

Low cost alternative to virgin resin with comparable quality and process ability

Processing: Injection Molding

Application: General Purpose, Industrial, Housewares, Construction

Color: General Purpose Black

Quality: ISO 9001:2015 registered, IEC 17025:2017 accredited laboratories, COA on every lot

Property
Value
Units
Test Method
Melt Flow 10-17 g/10 min ASTM D1238 / ISO 1133
Izod Impact Notched @ 23º C 1.5 Ft lbs/in ASTM 256 / ISO 180/A
Tensile @ Yield 2000 psi ASTM D638 / ISO 527-1/2
Flexural Modulus 0.05in/min 100,000 psi ASTM D790 / ISO 178
Barrel Temperature

Rear: 360˚F to 420˚F
Middle: 380˚F to 440˚F
Front: 400˚F to 420˚F

Molding Pressure

Boost: 500 to 1,500 psi
Hold: 50 to 75% of Boost
Back: 50 to 150 psi

Clamp Force

2 to 2.5 tons per square inch
part projected area

Mold Temperature

80˚F to 140˚F

Nozzle Temperature

400˚F to 420˚F

Drying

2 to 4 hours at 180˚F

Melt Temperature

400˚F to 440˚F

Screw Speed

Medium to Fast

IMPORTANT: The following supersedes buyer documents. Seller makes NO WARRANTY, REPRESENTATION OR CONDITION OF ANY KIND, EXPRESS OR IMPLIED (INCLUDING NO WARRANTY OF MERCHANTABILITY OR FITNESS OF THE GOODS FOR ANY USE CONTEMPLATED BY BUYER) concerning the Goods and none shall be implied by law. Final determination of the suitability of the Goods for the use contemplated by Buyer is the sole responsibility of Buyer, and Seller shall in no way be responsible for the suitability of the Goods for any particular end use.